
Flange plate, from a pencil sketch
PhotoDXF
Built from the written sizes in 10 s
Send a hand sketch, a scanned drawing or a phone photo of a flat part with its sizes written on it. It is drawn exactly from those sizes, checked, and shown to you before you pay $10.
Opens your email: attach the drawing and send. The preview comes back with a watermark.

PhotoDXF
Built from the written sizes in 10 s
A customer hands you a sketch on paper or a faded scan, and someone has to redraw it in CAD before it can be cut.
Tracing the picture copies its mistakes: sketches are rarely to scale, so a traced R52 can really be the R40 written next to it.
The written dimensions are read, not the lines: circles, slots, hole patterns, corner radii and the outline are rebuilt exactly from the numbers.
The preview lists what was checked against your drawing (for example the overall size), what was assumed and anything that was missing, so you can correct it in one reply.
Flat plate parts only: outlines and holes. Bent parts, 3D models and assemblies are not drawn.
Email up to five files: CAD files, PDFs, or scans and photos of a flat part with its sizes written on it. Say the format you need; DXF if you do not say.
Within minutes you get a watermarked picture of each part with its measured size, holes and cut length, what was checked and what was assumed, and the price: $10 per drawing.
Pay by card through a Gumroad checkout: no account, just an email for the receipt. If something is wrong, reply before paying and you get one corrected preview free.
The file comes by email as soon as the payment arrives, checked against the same sizes.
Each check runs on every file, and the preview tells you what it found.
The outer size is measured from the file. A sketch or scan is compared with every overall size written on it, and a size that does not match is shown in the preview.
Every outline and hole must close. Open chains are counted and reported, never hidden.
Gaps are closed and duplicate or zero-length lines removed, and each fix is listed in the preview.
Arcs and circles stay arcs and circles, not hundreds of short lines your machine slows down on.
Holes are counted and measured by diameter, so you can check them against your drawing at a glance.
The file is written in millimetres (DXF R2000) and opened again after writing to confirm the same sizes.